Wireless router connect direct to Dynex?

[arrbeejay]

Sorry if this is answered elsewhere. I have the following set-up:

1. Cable Modem
=> 2. Dynex Hub (splits signal to: 3, below; Apple TV, and internet-connected bluray player)
=> 3. LinkSys Router (RT31P2) with 2 phone ports (connects to a desktop computer, a phone, and 4, below)
=> 4. Netgear WGR614 Wireless router

Since the wireless router is last in line, the signal is not very strong. I tried connecting the Netgear directly to the Dynex, but even though there seemed to be a signal, I wasn't able to connect to the wireless router with my laptop.

There's probably somethig basic that I need to do in order to make this work. Any suggestions?

Thanks in advance for any help!

Bob

[jmizoguchi]

If you have have cable modem/gateway unity a wall working the what would. E an issues hooking router behind the switch despite that hooking up router behind gateway mode will be double NAT

[arrbeejay]

Originally Posted by jmizoguchi

If you have have cable modem/gateway unity a wall working the what would. E an issues hooking router behind the switch despite that hooking up router behind gateway mode will be double NAT

Sorry? Seems like your post was garbled. And I don't know what the implications of being "double NAT" are; please explain. Thanks!

[jmizoguchi]

google DOUBLE NAT.. router back to back is simply meaning of it


what is the cable modem model

[arrbeejay]

The cable modem is an "Arris".

[jmizoguchi]

Is this telephone capable arris modem?

Actual model of arris