Go Back   NETGEAR Forums > Home Products > Wireless Networking Products for SOHO applications > Wireless Router & Modem Gateways > 802.11b/g/n Routers > All 802.11 b/g/n Routers

Reply
 
Thread Tools Display Modes
  #1  
Old June 23rd, 2008, 12:06 PM
Tux Tux is offline
Junior Member
NETGEAR Newbie
 
Join Date: Jun 2008
Posts: 1
Tux is on a distinguished road
Default WPN 824 v2 Log in to the router...

I have tryde the setup wizard - it ends with - incorrect IP

Then i tryde to access the router by typing 192.168.0.1 or 192.168.1.1 or www.routerlogin.net or www.routerlogin.com.

My problem is that i can't seem to get any contact with the router.
never been promted to enter username and password

I have a Prestige 645 ADSL modem (works just fine)

PLZ need help.

B.R.
Magnus
Reply With Quote
  #2  
Old June 23rd, 2008, 12:23 PM
gayathri gayathri is offline
Senior Member
Advanced NETGEAR User
 
Join Date: Jun 2008
Location: india
Posts: 100
gayathri is on a distinguished road
Default Re: WPN 824 v2 Log in to the router...

hai


check --network connection-lan-ryt-click---properties
select ineternet protocol tcp/ip properties ......
make sure obtain an ip address automatically has been selected
__________________
Reply With Quote
  #3  
Old June 23rd, 2008, 04:29 PM
jmizoguchi's Avatar
jmizoguchi jmizoguchi is offline
Senior Member
NETGEAR Fanatic
 
Join Date: Feb 2007
Location: Kentucky, USA
Posts: 94,057
jmizoguchi is on a distinguished road
Default Re: WPN 824 v2 Log in to the router...

What is your Router's Default IP?
What is Router's Default IP Netgear uses? http://192.168.0.1 or http://192.168.1.1 are most common default router's IP for Netgear ( ex linksys uses http://192.168.1.1)
Is there other IP been used? At default, above two are the most common choice of IP from Netgear. There are some home end router's default router's IP has changes from above to 10.0.0.x ranage IP. This may have changes after certain firmware were applied.
So how do I found my router's IP? Most Prosfe and home end router has default router's information on the bottom of the units.

What is your Gateway IP?
Gateway IP is same as Router's IP. Gateway IP is what it makes your PC to have internet connection. There is many scenario on setting up router but we are only cover the basics of setting PC
Try Start>run and type CMD. At prompt type ipconfig
You will find "Gateway IP"

What is your Default IP Range
It's your DHCP Range which router or DHCP server will release to your PC.
Try Start>run and type CMD. At prompt type ipconfig
You will find "IP address"
IP address will also tell you what is DHCP range
ex. 192.168.0.8 tell you have DHCP Range of 192.168.0.x ~192.168.0.X
Possbile to have Gateway IP and IP address to be different? Yes. This instruction is basic setup of PC and router where router is your DHCP Server as well


above is from my "router setup" section.. see my signature for URL
__________________
VPN Case Study (www.vpncasestudy.com)
Our Second To None VPN Related Setup Case Study
"One Stop Solution To Your Netgear VPN Connectivity"
*Visit the site for Non-VPN related Doc & Links* [Windows & Mac user/support]

Most Other Useful Docs -"General Technical Documentation", "Router Reset", "Router Setup", "Print Server Tips", "Remote Admin"
"Wireless Tips"


Forum Policy

June Mizoguchi-i....@vpncasestudy.com
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -8. The time now is 09:50 PM.