resume from standby

[inoteb]

Hi,

Same problem here since the beginning (all FW since 268 I think).
With or without USB/SD.
DLNA is disabled.

The only way I found is : never put the unit in standby
And

I'll try to get a log

[inoteb]

Log files sent (PM)

[hawkeye1949]

It happens to me also,with or without USB connected. I never put the unit un standby, and it still happens.

[PlayIt]

Is the toslink (red) light supposed to be on in standby mode?

[inoteb]

Originally Posted by PlayIt

Is the toslink (red) light supposed to be on in standby mode?

No, should be orange (red = power off)

Apart from that, the "resume from standy" problem may be solved in the next firmware : perhaps something related to USB being power off when going to standy and powering on USB at the same time as HDMI.
To be continued ...

[PlayIt]

I'm talking about the toslink on the back for audio is on. I'm not talking about the light on the front.

[inoteb]

Originally Posted by PlayIt

I'm talking about the toslink on the back for audio is on. I'm not talking about the light on the front.

Sorry I read to fast.

I don't know if this is normal but mine is also red in standby

[Pix]

First I would like to say that my unit have this resume problem as well. I have a 8GB USB memory as cache in the back of the machine. USB timing issue could very well be the problem. Looking forward to try the next FW.

I would like a new feature that makes a visual indication that the unit actually receives the signal, when pressing powerup button on the remote when the unit is in standby mode. Waking up the unit takes some time and no visual indication at all is frustrating.

[Blenky]

I' running the latest Beta and always put the box into standby (orange light) when finished using it. Quite often when turning the unit back on the light goes green but nothing appears on screen. If I turn it back into standby it goes orange as usual. From here turning on changes the light to green but nothing on screen.

Only solution is to pull the power. Does not happen every time but enough to be a pain.

[dchainey]

As I've mentioned earlier in this thread, I've had this problem intermittently with the Neo 550 and the 9150. I usually see it right after the installation of a new FW, but it goes away after a day or two. I have not had it with FW 308, which I thought was meant to cure the problem. However it is very episodic, and may just be waiting to rear it's ugly head again. For the record I have an SD card permanently plugged in, but nothing in the USB ports.