VPN With iPhone :( Anyone got it to work?

[PaonQC]

Hi everyone,


I am begining to lose hope I am desperately trying to configure my FVS336Gv2 with my iPhone4 v4.2.1.


I began by installing the beta firmware 3.0.7-24
I configured the mode config and the exchange mode to Main
The tunnel is UP but I can't ping the other side

** Network configuration:
Ip lan:
Range 192.168.1.0/24
IPlan FVS336Gv2: 192.168.0.254
IpWan FVS336Gv2: 192.168.1.2
IP CBVG834G: 192.168.1.1 =. DHCP + port 500TCP + UDP redirected to the WAN IP of the FVS336Gv2

Configuration fvs336gv2:
WAN1 Configuration
WAN Mode: Single Port
WAN State: UP
NAT: Disabled
Connection Type: Static IP
Connection State: Connected
IP Address: 192.168.1.2
Subnet Mask: 255.255.255.0
Gateway: 192.168.1.1
Primary DNS: 89.2.0.1
Secondary DNS: 89.2.0.2

I can connect my Netgear Router to shrewvpn which works fine, meaning there is no issue with the port forwarding configuration.

I called the support who sent me a document, I followed did but no luck
They sent me another beta firmware version 3.0.7-32 but doesn't work any better
I went to "Security" :: "Firewall" :: "Attack Checks" and checked the option "Respond to Ping on Internet Ports".

I created a new user for VPN IPSEC

FYI: I try connecting with 3G and with WIFI

Any suggestions before I give up hope? Anyone got it to work ever

Thanks in advance for you help