Cannot access remote through vpn fvx538

[lensky68]

ok I recently posted about my fvl328. I'm trying to implement a fvx538 to replace the fvl, I have successfully setup and established some tunnels they say Im connected but no ping response and rdp doesn't work. Any suggestions?
Let me know if you need any more info. Thanks

[jmizoguchi]

Assume both LAN sunbet is different and RDP pc is trusting opposite subnet

[lensky68]

ok I have vpn lan set at 192.168.0.0 255.255.255.0 remote lan 192.168.2.0 255.255.255.0. Whats crazy is I ran to a remote location still running w2000 and the older safenet client it connected right up and worked no problem. The win 7 machines with the new client no go!

[jmizoguchi]

safe net does not work on win7.

are you using newest vpn client which are greenbow as OEM now

[lensky68]

Yea that was just an example that right now I have the fvx up and running. I have a few win2000 machines with the old client,worked great. With a win 7 machine running new client tunnel established no response from rdp.

[Daedalus01]

Check the firewall. Windows 7 firewall is more complex than before.

[lensky68]

I used wireshark to capture some ip traffic. I noticed that on the win7 comp all the right ip's are right but,when I try to ping or open rdp there's no call for it or nothing outgoing. I have all the firewalls turned off just to get it to work.Still nothing not sure where to look now. Maybe outgoing traffic?

[jmizoguchi]

Can you even open shared filed on pc if you test it?

[adit]

Is the default gateway on the PC the IP of the FVX538?

Which security software(s) is installed on the PC?

[lensky68]

OK Guy's! Thanks a million! I tried a few of the suggestions, and the gateway setting is the one that worked! Works great! Thanks Again!