Go Back   NETGEAR Forums > Enterprise/Business Products > Firewall / VPN Devices > VPN Routers

Reply
 
Thread Tools Display Modes
  #1  
Old April 15th, 2012, 01:09 AM
Rosen Rosen is offline
Junior Member
NETGEAR Newbie
 
Join Date: Jun 2007
Posts: 2
Rosen is on a distinguished road
Default [FVS318N] VPN Traffic Selection on subnets smaller than /24

Hi!

I'm configuring a FVS318N device which I'm going to send to our remote site soon. It is going to communicate with our main SRX-5308 through a VPN tunnel.

This is the setup:

Site 1: 10.240.1.0/27 (SRX-5308)
Site 2: 10.240.1.32/27 (FVS318N)

I have created a Site-to-Site VPN tunnel on both routers with the VPN Policy Wizard. On the SRX-5308, the VPN policy were created fine with:

Local: 10.240.1.0/255.255.255.224
Remote: 10.240.1.32/255.255.255.224



But on the FVS318N, the .32 in the Local field keeps resetting to .0!

Local: 10.240.1.0/255.255.255.224
Remote: 10.240.1.0/255.255.255.224



I've tried editing the Local Subnet in the VPN policy, but it doesn't matter what I enter, the last numbers are always changed to 0 when i hit Apply. I've tried recreating the policy from scratch, but that doesn't help either.

I haven't been able to test this over a WAN link yet, so I don't know if it will work - but I get the feeling that if I want to communicate with the .32/27 net it shouldn't say .0/27 in the config.

Am I or the router doing something wrong?

VPN Policy config - SRX5308: http://i1066.photobucket.com/albums/...4_22-37-40.png
VPN Policy config - FVS318N: http://i1066.photobucket.com/albums/...4_22-38-37.png
Reply With Quote
  #2  
Old April 15th, 2012, 06:19 AM
jmizoguchi's Avatar
jmizoguchi jmizoguchi is offline
Senior Member
NETGEAR Fanatic
 
Join Date: Feb 2007
Location: Kentucky, USA
Posts: 94,057
jmizoguchi is on a distinguished road
Default Re: [FVS318N] VPN Traffic Selection on subnets smaller than /24

both end must be different subnet

a- 10.240.1.0
b- 10.240.10.0
__________________
VPN Case Study (www.vpncasestudy.com)
Our Second To None VPN Related Setup Case Study
"One Stop Solution To Your Netgear VPN Connectivity"
*Visit the site for Non-VPN related Doc & Links* [Windows & Mac user/support]

Most Other Useful Docs -"General Technical Documentation", "Router Reset", "Router Setup", "Print Server Tips", "Remote Admin"
"Wireless Tips"


Forum Policy

June Mizoguchi-i....@vpncasestudy.com
Reply With Quote
  #3  
Old April 15th, 2012, 08:05 AM
adit's Avatar
adit adit is offline
Moderator
NETGEAR Fanatic
 
Join Date: Nov 2006
Location: USA
Posts: 5,238
adit is on a distinguished road
Default Re: [FVS318N] VPN Traffic Selection on subnets smaller than /24

It's a bug in the firmware, call Support.
__________________
.
Forum Rules - Post Screenshots on ImageShack for Free - Firmware Upgrade Procedure
.
Online Subnet Calculator - LAN Subnets NOT to Use - SA Lifetime Guidelines - Hex/IP Converter
.
Free Netgear Support Online Trouble Ticket Submissions 1-888-NETGEAR 4,3 Netgear Knowledge Base
.
VPN Router Support, Interface Demos,and Marketing Pages:
.
SRX5308 S M - FVS336G S I I M - FVS318G S M - FVS318N S M - FVS338 S I I M - SRXN3205 S M -
VPNG01/5L S M - FVS318 S I I M - DGFV338B S I M - FVG318 S I I M - SSL312 S I M - FVX538 S I I
.
FVS114 - FVS124G - FVS328 - FVL328 - FWG114P - GPL Firmware Code - MyOpenRouter - VPNC Docs
.
Click Here for my VPN Client and Mode Config VPN Client Tutorials
.
ProSecure STM/UTM Appliance User Forum - Prosecure Marketing Website
.
.
Good Luck...ADIT

FYI - I am a Reseller and not employed by Netgear
Reply With Quote
  #4  
Old April 16th, 2012, 05:20 PM
Daedalus01's Avatar
Daedalus01 Daedalus01 is offline
Senior Member
Advanced NETGEAR Expert
 
Join Date: Nov 2008
Location: Dallas Texas
Posts: 627
Daedalus01 is on a distinguished road
Default Re: [FVS318N] VPN Traffic Selection on subnets smaller than /24

What adit said. you can also get around by doing what June said as well. Set the subnets further about.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -8. The time now is 02:59 AM.