Netgear Router WGR 614 V7

[immigrant]

Hi all,

I am new here to this nice forum.

I have a problem. My router is set up in a Bridge mode and creates a wireless network the same as main router. It works but in every around 24 hours something is happening( maybe a lease or something else is expiring and it prevent devices in close proximity to connect to the wireless network neither created from main router nor from WRG614 wireless network.). I am not sure what to check to see what exactly is happening in the network that creates that problem. Any devices connected to the Ethernet ports of the router are working fine all the time.

Could please help me that issue and what i should loot at?


Thanks in advance

[jmizoguchi]

not clear on setup.
setup is like below?
http://kb.netgear.com/app/answers/detail/a_id/965

[immigrant]

Hi there,

Yes the set up is like one from provided link! And again, everything works fine once i restart the router and then in a specific time(around 24 house i think) when no wireless host can connect to it.
Here are the other settings:

Basic Set:
1) Does your internet connection require login: NO
2)DNS Address get automatically form ISP
3)Router MAC address: use default address

Wireless Set:
1)Wireless Network
-Name: Gogo(the same as the main router)
-Region US
-channel 11(main router is 6)
-mode: g and b
2) Security
-wpa-psk[tkip] + wpa2-psk[aes] (main routher is WPA/WP2 Personal)
I have noticed when that Problem occurs the password that i enter does not get accepted and it says WEP Password is not right is there a way that somehow can get messed up?
3) password (the same as the main router)

Content Filtering:
Nothing is configured here

Maintenance:
Router status:It shows that nothing is configured under Internet Port and LAN Port and for Wireless Port:
-Name Gogo
-Region US
-Channel 11
-Mode g and b
-Wireless AP ON
-Brodcast name ON
Firmware Version is v2.0.30_2.0.30NA
Attached Devices: All devices on the entire network
Backup Set: None

Advanced:
Wireless Set:
-enable wireless router radio ON
-enable ssid broadcast ON
-wireless card access is OFF
-enable WMM Disabled
Port Forwarding Port Triggering is not set up
Wan Setup
-connect automatically, as required OFF
-disable SPI Firewall OFF
-default DMZ Server OFF
- respond to ping on internet port OFF
-MTU size 1500
-Nat Filetering Secured
LAN TCP/IP Setup
IP Address: unique for the LAN
IP Subnet Mask the same as the for LAN
RIP Direction None
Rip Version Diabled
Use Router as DHCP Server OFF

Dynamic DNS is not configured
Static Routes is not configured
Remote Management ON
UPnP is ON
-advertisement period 30 min
-adverisement time ot live 4

[jmizoguchi]

most missing is the ip address of LAN

[immigrant]

it is 10.0.1.99 where the gateway ip is 10.0.1.1

[jmizoguchi]

should all work. if you did same as URL

[immigrant]

It does work until as i already said, something gets messed up and does not allow computers to connect to it.
Any idea why it gives me an error that WEP password is not correct when i use WPA2 password? This message really throws me off when the issue occurs.

Thanks for your help!

[jmizoguchi]

??

WEP uses hex code
Wpa2 uses passphrase

[immigrant]

That's what i am saying,

I use WPA2 But it says that WEP is not correct?

Maybe the device is screwed up

[immigrant]

Quick update:

Today, that happened again and i think it has something to do with overlapping channels rather setting problems. Because i have a couple devices creating the same network when they overlap it prevents computers to connect to the network when are in that overlapping area. Do you think thats the problem?