- United States
- English
- Worldwide
|
#1
June 20th, 2012, 02:34 PM
|
|||
|
|||
Can't open port 21 on WNR1000v3
I have a D-link NAS and I'm trying to set up FTP through the WNR1000v3 router using remote management. I downgraded the firmware from the latest version because of wireless connectivity issues. Port 80 is open and I can access the NAS software through my dyndns hostname. I set up port 21 in the router port forwarding with the IP address of the NAS but it won't open. Any suggestions?
|
|
#2
July 1st, 2012, 02:04 PM
|
||||
|
||||
Re: Can't open port 21 on WNR1000v3
wnr1000 is NOT super G wireless. it is N ROUTER
belong to http://forum1.netgear.com/forumdisplay.php?f=33
__________________
VPN Case Study (www.vpncasestudy.com) Our Second To None VPN Related Setup Case Study "One Stop Solution To Your Netgear VPN Connectivity" *Visit the site for Non-VPN related Doc & Links* [Windows & Mac user/support] Most Other Useful Docs -"General Technical Documentation", "Router Reset", "Router Setup", "Print Server Tips", "Remote Admin" "Wireless Tips" Forum Policy June Mizoguchi-i....@vpncasestudy.com
|
|
#3
July 1st, 2012, 02:05 PM
|
||||
|
||||
|
Re: Can't open port 21 on WNR1000v3
check make sure your ISP is not blocking ftp 21.
__________________
VPN Case Study (www.vpncasestudy.com) Our Second To None VPN Related Setup Case Study "One Stop Solution To Your Netgear VPN Connectivity" *Visit the site for Non-VPN related Doc & Links* [Windows & Mac user/support] Most Other Useful Docs -"General Technical Documentation", "Router Reset", "Router Setup", "Print Server Tips", "Remote Admin" "Wireless Tips" Forum Policy June Mizoguchi-i....@vpncasestudy.com
|
 |
«
Previous Thread
|
Next Thread
»
| Thread Tools | |
| Display Modes | |
Linear Mode
|
|
All times are GMT -8. The time now is 02:50 PM.