DGN2000 Port Forwarding

[wbrproductions]

Hello - there does not appear to be a port forwarding option in the mgmt interface for the DGN2000 router. How do I do this? I am trying to setup RDC between machines on the LAN, and from outside to one of the machines inside the LAN.

Thanks,
wbrproductions

[jmizoguchi]

reall? mmm strange .... I seen in in this french language interface

http://interface.netgear-forum.com/DGN2000/start.htm
"Règles de pare-feu" I guess this rules you will in/out bound rules



look under services for inbound rules. off-course you need to create services for RDP ports and setup inbound rules.

[jmizoguchi]

Wrong area

moving to rangemax next routers

[wbrproductions]

Thanks for the quick replies but I still need to know how to do port forwarding. Like I said, its not in the management interface. I have the latest firmware installed.

[jmizoguchi]

see router reset on my sig below and step 1

you have make service port for 3389 under "services'

then you go to tab above "services" and make inbound rules with services you just created

if you look the ULR I gave you and see tab "Règles de pare-feu" ( I don't have same unit so you have to make due with what I can provide)

if reset do not fix it and don't see similar then called support

[wbrproductions]

Thanks much for your reply, I appreciate it. The problem turned out to be Windows Firewall - turned that off on all machines and I can now reach the machine via RDC. WF not needed, as the router has a firewall.

[BlackSoldierB]

Originally Posted by jmizoguchi

reall? mmm strange .... I seen in in this french language interface

http://interface.netgear-forum.com/DGN2000/start.htm
"Règles de pare-feu" I guess this rules you will in/out bound rules



look under services for inbound rules. off-course you need to create services for RDP ports and setup inbound rules.

is there one in english to?

[BlackSoldierB]

is the interface in english to?

[jmizoguchi]

Originally Posted by BlackSoldierB

is the interface in english to?

not in DEMO for this model

[BlackSoldierB]

oops double quote