Old October 21st, 2009, 04:34 PM
ojii ojii is offline
Junior Member
Join Date: Oct 2009
Posts: 3
ojii is on a distinguished road
Smile UVerse

Any help?

I am an AT&T UVerse user with 2WIRE router. Initially , they installed a 2Wire 11.g USB Adapter that went bad and it was suggested that I use a RangeMax USB 2.0 WPN111NA which is working just fine. My computer XP SP2 crashed and now I cannot run the NETGEAR WPN111 Smart Wizard. It installs but after I am prompted to connect the adapter, it stalls. ATT told me to load the 2Wire router software, which I did but under “Network Connections” the only two icons are the 1394 and Local Area Connections. When I attempt to run the Smart Wizard, the window shows only for a second. Then blue light is not flashing in the RangeMax. Where did I go wrong with this install? Thank you for a “fix.”
Reply With Quote
Old October 21st, 2009, 11:56 PM
sagada2008's Avatar
sagada2008 sagada2008 is offline
Senior Member
Advanced NETGEAR Expert
Join Date: Apr 2009
Posts: 514
sagada2008 is on a distinguished road
Default Re: UVerse

Hi ojii,

It appears that the computer is not able to detect the wireless USB adapter. For the driver to be install properly make sure that the PC detects the adapter first. I believe there are other USB port at the back of your computer, try to insert the adapter on that port and check if the PC will detect it. If you are using a dongle or an extender try not to use it. Once the PC detects the adapter you can download the latest driver on this link:

Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

All times are GMT -8. The time now is 08:07 PM.