#1  
Old October 24th, 2011, 01:30 PM
raagulan raagulan is offline
Junior Member
 
Join Date: Jan 2011
Posts: 3
raagulan is on a distinguished road
Default ACCESS POINT and ReadySHARE

Hi Friends,


is any one succeed setting up WNDR4000 as access point and using USB storage..?

i am using FVS318G as the main router (LAN IP 192.168.1.1) connected to WAN and connected WNDR4000 with the LAN IP 192.168.2.1. but i couldn't able to connect to my hard drive from my PC (via routerlogin.net domain). also right after i connect the WAN feed to WNDR4000 i couldn't able to go to the configuration page any more...

My hard drive is compatible because when i disconnect the WAN feed i could able to see my hard drive on my PC

any hint..?

thanks
Reply With Quote
  #2  
Old November 13th, 2011, 08:20 AM
jmizoguchi's Avatar
jmizoguchi jmizoguchi is offline
Junior Member
 
Join Date: Feb 2007
Location: Kentucky, USA
Posts: 0
jmizoguchi is an unknown quantity at this point
Default Re: ACCESS POINT and ReadySHARE

What makes you think that if fvs is 192.168.1.1 and access point is set as 192.168.2.1 will work for oc that has 192.168.1.x


Correct as follow

192.168.1.1 fvs
192.168.1.2. 4000

Dchp range of fvs should be 192.168.1.3~192.168.1.254
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -8. The time now is 02:18 AM.