Old December 15th, 2011, 12:49 PM
keith4098 keith4098 is offline
Junior Member
Join Date: Aug 2011
Posts: 1
keith4098 is on a distinguished road
Default MBR1210 Transmit Power to External Antenna

I have the Netgear MBR1210 Mobile Broadband Wireless Router. To obtain the 3G HSPA Internet connection from Bell Canada I have a 14dB gain Yagi external antenna connected to the Router's R-TNC external antenna connector. I am in a rural area, and the rf signal path from my antenna to Bell's Cell Tower is not line-of-sight. The signal to/from the cell tower is weak, and I wish to install an external amplifier between Router and my antenna to improve communication.

The weakest link is the transmitted upload power from Router through to the Cell Tower. To permit me to select an appropriate amplifier, can anyone tell me what is the Router's specified transmit (upload) power in milliwatts or dbm at it's R-TNC external antenna connector, for each of the two frequency bands 824-894 Mhz, and 1850-1990 Mhz.

The personnel that I have been in contact with at Bell do not have this information. Any assistance on this is certainly appreciated. Thank you.
Reply With Quote
Old December 15th, 2011, 06:59 PM
jmizoguchi's Avatar
jmizoguchi jmizoguchi is offline
Junior Member
Join Date: Feb 2007
Location: Kentucky, USA
Posts: 0
jmizoguchi is an unknown quantity at this point
Default Re: MBR1210 Transmit Power to External Antenna

that is USB done side so I would say your cell people should able to help you out better .


these are pretty good device to gain more signal
Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

All times are GMT -8. The time now is 06:43 PM.