#1  
Old March 16th, 2012, 12:41 PM
shallowz shallowz is offline
Junior Member
NETGEAR Newbie
 
Join Date: Jan 2012
Posts: 17
shallowz is on a distinguished road
Default Foscam IP camera forward issues

Ok i have been trying for a while to get a Foscam ip camera to port forward so i can view my camera.
the only thing that seems to partly work is if i do the port forwarding to port 80. but when that happens some of the functions of the camera do not work

Here is a link from forscam to set up the camera with a Netgear router. please look at their directions which i follow to the letter and let me know what could be the issue?

http://foscam.us/blog/foscamipcamera...etgear-router/
Reply With Quote
  #2  
Old March 16th, 2012, 01:23 PM
fordem fordem is offline
Senior Member
NETGEAR Fanatic
 
Join Date: Nov 2006
Posts: 7,367
fordem is on a distinguished road
Default Re: Foscam IP camera forward issues

First - does the camera work properly from inside your network? Port forwarding is not required when you're connecting to the camera from inside the network.

Once you have this part sorted - then address the remote access issues.
__________________
Give a man a fish, feed him for a day
Teach a man to fish, feed him for life.
Reply With Quote
  #3  
Old March 16th, 2012, 04:47 PM
jmizoguchi's Avatar
jmizoguchi jmizoguchi is offline
Junior Member
 
Join Date: Feb 2007
Location: Kentucky, USA
Posts: 0
jmizoguchi is an unknown quantity at this point
Default Re: Foscam IP camera forward issues

Quote:
if i do the port forwarding to port 80. but when that happens some of the functions of the camera do not work

Not clear.......
Reply With Quote
  #4  
Old March 19th, 2012, 04:44 AM
shallowz shallowz is offline
Junior Member
NETGEAR Newbie
 
Join Date: Jan 2012
Posts: 17
shallowz is on a distinguished road
Default Re: Foscam IP camera forward issues

yes the camera works %100 inside the network

Outside the network when ONLY using Port 80 can you see the video but the audio funtions do not work.

when using any other port for port forwarding like 8090 (like the example on foscams web site), 9002, 9012, or 9077 when you trying going to those web sites it does not connect.

So my thinking is that netgear is not forwarding correctly. but i am not smart enough to know how to fix it
Reply With Quote
  #5  
Old March 19th, 2012, 12:03 PM
fordem fordem is offline
Senior Member
NETGEAR Fanatic
 
Join Date: Nov 2006
Posts: 7,367
fordem is on a distinguished road
Default Re: Foscam IP camera forward issues

The instructions from foscam appearing to be missing a vital step - if you are going to use a non standard port, using those instruction, you will also need to change the port the camera is listening on to match what the port you forward in the router.
__________________
Give a man a fish, feed him for a day
Teach a man to fish, feed him for life.
Reply With Quote
  #6  
Old March 19th, 2012, 12:16 PM
shallowz shallowz is offline
Junior Member
NETGEAR Newbie
 
Join Date: Jan 2012
Posts: 17
shallowz is on a distinguished road
Default Re: Foscam IP camera forward issues

oh i got that part
there is a section on the devices web site where you change the port to the one you are using.
I did that step.
I made it the same port as the one i put on the netgear site.

But only port 80 semi works
Reply With Quote
  #7  
Old March 19th, 2012, 03:12 PM
jmizoguchi's Avatar
jmizoguchi jmizoguchi is offline
Junior Member
 
Join Date: Feb 2007
Location: Kentucky, USA
Posts: 0
jmizoguchi is an unknown quantity at this point
Default Re: Foscam IP camera forward issues

Quote:
But only port 80 semi works
I think you should talk to foscam support.
Reply With Quote
  #8  
Old March 20th, 2012, 12:32 AM
Mars Mug's Avatar
Mars Mug Mars Mug is offline
Moderator
NETGEAR Fanatic
 
Join Date: Nov 2006
Location: Stevenage UK
Posts: 12,499
Mars Mug is on a distinguished road
Default Re: Foscam IP camera forward issues

This may seem obvious, but some people miss it; you are adding the port number to the URL/IP aren’t you e.g. {your.url.org:9012} or {123.211.22.55:9012}?

Most IP cameras I have used allow for two port numbers e.g. port 80 by default and a second user selected port.

The transfer of sound may use protocols that need to be supported by the router/OS/browser, I have found the transfer of sound to be quite difficult, and when it did work the lag made it pretty useless.
__________________
I don't work for Netgear.

My name is Andy.
Reply With Quote
  #9  
Old March 20th, 2012, 03:04 AM
jmizoguchi's Avatar
jmizoguchi jmizoguchi is offline
Junior Member
 
Join Date: Feb 2007
Location: Kentucky, USA
Posts: 0
jmizoguchi is an unknown quantity at this point
Default Re: Foscam IP camera forward issues

I just installed dlink one and it only uses single ports for video and sound with default 80 but changed to 5000 -5009 range ports for for 9 camera
Reply With Quote
  #10  
Old March 20th, 2012, 08:49 AM
shallowz shallowz is offline
Junior Member
NETGEAR Newbie
 
Join Date: Jan 2012
Posts: 17
shallowz is on a distinguished road
Default Re: Foscam IP camera forward issues

Mars Mug - no nothing is to simple. Most of the time it is the simple stuff that usually fixes things.
But that time i was actually putting the port number on the web link

jmizoguchi - I am doubtful this is a Foscam issue because if i change the port from the camera i can access it inside the network no matter what port i change it to 5000, 9002, 9011, etc. Every time i change it and add the 192.168.1.10:???? static address i can see the camera with in my network. But if i change the setting in the port forwarding in netgear every time i try to connect to the device from outside the network ???.???.???.???:9002 i always get
"could not connect to ???.???.???.???:9002"
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -8. The time now is 12:03 PM.