WNDR 4000 as Repeater

[aboese]

Originally Posted by jmizoguchi

yes........ if you use ethernet cable then only follow the
http://kb.netgear.com/app/answers/detail/a_id/965


rest post other than above does not applied to you for using two router using ethernet cable

I have tried with cables, without cables, I have tried everything listed above and nothing is working. What am I missing?

[jmizoguchi]

Recent URL is to use with Ethernet cable only and other setting should relates to repeating should all deleted

[aboese]

OK, I am rethinking this because I can't get it to work, I have a question.

Can I have four different wireless routers, all with the same SSID broadcast and same security key, but different IP ranges (for example 192.168.1.x, 192.168.2.x, 192.168.3.x and 192.168.4.x). That way I can configure them as wireless routers, but still allow my guys to walk around the office and not have to connect to a different wireless SSID with a different key. They would just get an updated IP Address.

[jmizoguchi]

Same SSID and encryption.

[jmizoguchi]

wrong IP

192.168.1.2 AP1
192.168.1.3 AP2
192.168.1.4 AP3

IP should be OUTSIDE OF DHCP RANGE

[aboese]

Originally Posted by jmizoguchi

Same SSID and encryption.

So that should in theory work without creating a network storm?

Do I daisey change the routers using the WAN ports or do I configure it one on my network?

[jmizoguchi]

Originally Posted by aboese

So that should in theory work without creating a network storm?

Do I daisey change the routers using the WAN ports or do I configure it one on my network?

ALL LAN PORTS ONLY.. there is NO WAN are used for single network design just like the URL

http://kb.netgear.com/app/answers/detail/a_id/965