#1  
Old January 10th, 2013, 07:25 AM
chrch01 chrch01 is offline
Junior Member
NETGEAR Newbie
 
Join Date: Jan 2013
Posts: 9
chrch01 is on a distinguished road
Default IPAD IOS 6.0.1 and SRXN3205 VPN

I am having a time getting the VPN for the IPAD to connect to my 3205.. I am following some instructions which I have but cant attach but it will not connect. I am using a dyndns and have used both on the vpn client but nothing works.. my latest error is no response from the vpn server where before it was an authentication error.

I want to use this for a secure connection for my control 4 app.

thanks in advance

Chris
Reply With Quote
  #2  
Old January 10th, 2013, 12:10 PM
jmizoguchi's Avatar
jmizoguchi jmizoguchi is offline
Junior Member
 
Join Date: Feb 2007
Location: Kentucky, USA
Posts: 0
jmizoguchi is an unknown quantity at this point
Default Re: IPAD IOS 6.0.1 and SRXN3205 VPN

Did you test with WiFI? if you are only testing with 3/4G
Reply With Quote
  #3  
Old January 10th, 2013, 12:22 PM
chrch01 chrch01 is offline
Junior Member
NETGEAR Newbie
 
Join Date: Jan 2013
Posts: 9
chrch01 is on a distinguished road
Default Re: IPAD IOS 6.0.1 and SRXN3205 VPN

Yes but the wifi was internal but received the same msg.. user authentication failed. I have also opened a ticket with ATT and Netgear.
Reply With Quote
  #4  
Old January 10th, 2013, 12:29 PM
jmizoguchi's Avatar
jmizoguchi jmizoguchi is offline
Junior Member
 
Join Date: Feb 2007
Location: Kentucky, USA
Posts: 0
jmizoguchi is an unknown quantity at this point
Default Re: IPAD IOS 6.0.1 and SRXN3205 VPN

Som the tunnel will fail on 3G on cell data if was on standard data and not enterprise.


If authentication failed then you go basic setup wrong. Also on remote wifi you will need VPN passthrough support on remote router as well

http://vpncasestudy.com/download/use...ith_Iphone.pdf
newer doc is also still the same setup
Reply With Quote
  #5  
Old January 10th, 2013, 12:48 PM
chrch01 chrch01 is offline
Junior Member
NETGEAR Newbie
 
Join Date: Jan 2013
Posts: 9
chrch01 is on a distinguished road
Default Re: IPAD IOS 6.0.1 and SRXN3205 VPN

Thanks, this doc is a similar version I used from Control4.. The only difference is Main vs Aggressive. if I use Main, i get an error saying no response from the vpn server and if I use aggressive I get an authentication failed msg. the user and psw have been verified.
Reply With Quote
  #6  
Old January 10th, 2013, 01:00 PM
jmizoguchi's Avatar
jmizoguchi jmizoguchi is offline
Junior Member
 
Join Date: Feb 2007
Location: Kentucky, USA
Posts: 0
jmizoguchi is an unknown quantity at this point
Default Re: IPAD IOS 6.0.1 and SRXN3205 VPN

Earlier firmware that supported iPhones used iPhone and latest firmware now uses aggressive

Do you have latest firmware?

Best test is to put spare wifi router on WAN of srxn and do direct test
Reply With Quote
  #7  
Old January 11th, 2013, 03:49 AM
chrch01 chrch01 is offline
Junior Member
NETGEAR Newbie
 
Join Date: Jan 2013
Posts: 9
chrch01 is on a distinguished road
Default Re: IPAD IOS 6.0.1 and SRXN3205 VPN

Netgear firmware is up to date and Ipad ios is uptodate. testing the wifi suggestion next, thanks.
Reply With Quote
  #8  
Old January 11th, 2013, 05:08 AM
chrch01 chrch01 is offline
Junior Member
NETGEAR Newbie
 
Join Date: Jan 2013
Posts: 9
chrch01 is on a distinguished road
Default Re: IPAD IOS 6.0.1 and SRXN3205 VPN

tried wifi connection and get same results but different log messages.. both indicate here is the first part of the log.

Received mode config from 192.168.1.4[500], but we do not have ISAKMP-SA._
2013 Jan 11 08:11:55 [SRXN3205] [IKE] an undead schedule has been deleted: 'ph1_main'._
2013 Jan 11 08:11:55 [SRXN3205] [IKE] Failed to find proper address pool with id -1_
2013 Jan 11 08:11:55 [SRXN3205] [IKE] Sending Informational Exchange: delete payload[]_
2013 Jan 11 08:11:55 [SRXN3205] [IKE] Login failed for user "ipaduser"_
2013 Jan 11 08:11:55 [SRXN3205] [IKE] 0.0.0.0 IP address has been released by remote peer._
Reply With Quote
  #9  
Old January 11th, 2013, 05:33 AM
adit's Avatar
adit adit is offline
Moderator
NETGEAR Fanatic
 
Join Date: Nov 2006
Location: USA
Posts: 5,330
adit is on a distinguished road
Default Re: IPAD IOS 6.0.1 and SRXN3205 VPN

Read my LAN Subnets NOT to Use tutorial.
Reply With Quote
  #10  
Old January 11th, 2013, 05:37 AM
jmizoguchi's Avatar
jmizoguchi jmizoguchi is offline
Junior Member
 
Join Date: Feb 2007
Location: Kentucky, USA
Posts: 0
jmizoguchi is an unknown quantity at this point
Default Re: IPAD IOS 6.0.1 and SRXN3205 VPN

On user , did you use IPsec VPN user?

Also make sure IP pool for Modeconfig is no same as your LAN subnet.

ex 192.168.1x is your primary SXRX LAN then IP Pool must be 192.168.9.x
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -8. The time now is 01:08 PM.